Technical Specification :
  Suitable for online installation with flanged or screw connection
  with several options of materials for wetted parts.
  Avaliable Sizes :
  15 NB to 100 NB
  Ranges :
  2.5 to 40,000 LPH of water at ambient temperature.
  0.1 to 750 Nm³/hr of air at NTP.
  Accuracy :
  +2% of FSD
  Accessories :
  High & Low Flow Alarms
  Related Links: Acrylic Body Rotameter | Low Flow Rotameter

  Technical Specification :
  Suitable for inline installation with flanged or screwed connection   with several options of materials for wetted parts.
  Avaliable Sizes :
  15 NB to 100 NB
  Ranges :
  2.5 to 40,000 LPH of water at ambient temperature.
  0.1 to 300 Nm³/hr of air.
  Accuracy :
  +2% of FSD
  Accessories :
  High & Low Flow Alarms
  Related Links: Glass Tube Rotameter | Low Flow Rotameter

  Technical Specification :
  Suitable for purging or low flowrate measuring. The standard   mounting is ¼" BSP rear, although several arrangement of flanged
  or hose pipe connections are offered on request.
   Ranges :
  0.6 to 160 LPH of water at ambient temperature.
  10 to 5000 NLPH of air at NTP.Accuracy:+ 2 FSD.
  Accessories :
  Built in needle valve. DP regulator. Panel Mounting Clamps.
  High & Low Flow Alarms.
  Related Links: Glass Tube Rotameter | Acrylic Body Rotameter

  Technical Specification :
  Suitable for metering floe rates in 50 NB & above pipeline. Available   in a variety of materials, carrier rings, impulse piping and rotameter   as flow indicator.
  Avaliable Sizes :
  50 NB to 450 NB
  Ranges :
  20 to 300 M³/hr of water 0.1 to 800 Nm³/hr of air at NTP
  Accuracy :
  ± 2% of FSD
  Accessories :
  Isolating Valves.
  Related Links: Glass Tube Rotameter | Acrylic Body Rotameter

  Technical Specification :
  Suitable for metering of translucent / opaque fluids under high
  operating pressure and temperature.
  Avaliable Sizes :
  In 316 SS construction with flanged connections in line size from 20   NB to 100 NB
  Ranges :
  100 to 60.000 LPH of water at ambient temprature. 2.5 to 1700   Nm³/hr of air at NTP.
  Accuracy :
  ± 2% of FSD & ± 1.5% of FSD on request.
  Related Links: Glass Tube Rotameter | Acrylic Body Rotameter

  

  Technical Specification :
  "U" Tube type Primary standard Manometer used for precision   measurement of pressure, vacuum, differential pressure, and flow   measurement in plants and labs where certain accuracy is required.
  Avaliable Sizes :
  In Wall mounted & stand mounted.
  Ranges :
  100-0-100 to 1000-0-1000mm WC/HG.
  Related Links: Acryalic Body Inclined Manometer | Single Limb                                  Manometer | "U" Tube Manometer

  Technical Specification :
  "U" Tube type Primary standard Manometer used for precision   measurement of pressure, vacuum, differential pressure, and flow   measurement in plants and labs where certain accuracy is required.
  Avaliable Sizes :
  In Wall mounted & stand mounted.
  Ranges in mm :
  50-0-50 to 250-0-250 mm
  Related Links: Acryalic Body Inclined Manometer | Single Limb   Manometer | Industrial Grade Metallic Body U- Tube Manometer

  Technical Specification :
  CVG solid acrylic body portable manometers are fabricated from 1   inch. Thick acrylic plastic solid block, vertially unbreakable stable and   free of distortion. PVC plastic engraved scale, zero adjusting knob,   level bottom and panel mounting holes provide with manometer.
  Ranges :
  10 mm wg to 200 mm wg.
  Related Links: "U" Tube Manometer | Single Limb Manometer
                                 Industrial Grade Metallic Body U- Tube Manometer

  Technical Specification :
  Single Limb well type Direct Reading Manometer for the precision   measurement of pressure, vacuum different pressure flow and liquid   level measurement.
  Avaliable Sizes :
  In wall mounted and stand mounted.
  Range:
  0-100 to 0-500
  Related Links: Acryalic Body Inclined Manometer | "U" Tube   Manometer | Industrial Grade Metallic Body U- Tube Manometer

  Technical Specification :
  New Bolted Gland with teflon packing ensures positive leaktighnes   for full vacuum as well as 10kg/cm2 pressure service.
  Light Weight :
  75% less in weight compared to Reflex and Transparent liquid level   indicators. Extraordinary strength but less bulky.
  Excellent Visibility :
  16/19/25mm O.D Borosilicate glass gives excellent visibility.
  Surface tension effects are eliminated.
  Test Pressure :Full vacuum and/or 10 kg/cm² compressed Air.
  Related Links  : Side Mounted Magnetic Level Indicator |
                                    Top Mounted Magnetic Level Indicator

  Technical Specification :
  Simple magnetic principle used to get unique, absolutely safe and   most reliable level indicator for dangerous liquids even under high   pressures.
  Application :
  Corrosive acids - oleum, H2SO4
  HNO3,Acetic.
  Solvents - bezene, toluene, alcohols, CS2.
  Liq. Gases - LPG, NH3, Chlorine.
  Propylene, Butadiene.
  Veg.Oils, Fuel Oils, Lubricants, Water
  Poisonous / toxic liquids, DMA, TEA, PCL3.SO3
  Accessories :
  High & Low level Alarm.Resistance Strip with 4-20 m Amp. output.
  Related Links: Tabular Glass Level Indicator | Top Mounted                                  Magnetic Level Indicator

  Technical Specification :
  Simple principles of mechanics and magnetism harnessed to offer   an absolutely safe, reliable and trustworthy level indicator for   dangerous and toxic liquids under high pressure and Temperatures.
  Application :
  Dipstick substitute
  Underground tanks
  Horizontal tank
  Corrosive acids such as H2S04,RNO3 chlorosulphonic acid, oleum,   acetic, CS2
  Solvent tanks such as benzene, Acetone, toluene, alcoholic liquids or   any
  organic liquid, butadiene, vinyl acetate, vinyl chloride.
  Liquefied Gases such as liquid chlorine, liquid ammonia, LPG   Molten Sulphur
  Phosphorus, Lead etc.
  Related Links: Tabular Glass Level Indicator
                                 Side Mounted Magnetic Level Indicator

  Technical Specification :
  Available in full view, double window, single window with flapper,   rotary wheel and in drip tube design, suitable for different type of   fluids.
  Type of Connection :
  Screwed or Flanged.
  Available Sizes :
  12 NB to 250 NB
  Related Links  : Tabular Glass Level Indicator
                                    Top Mounted Magnetic Level Indicator

  Technical Specification :
  Available in full view, double window, single window with flapper,   rotary wheel and in drip tube design, suitable for different type of   fluids.
  Type of Connection :
  Screwed or Flanged.
  Available Sizes :
  12 NB to 250 NB
  Related Links  : Tabular Glass Level Indicator
                                   Top Mounted Magnetic Level Indicator

  Technical Specification :
  CVG Magnetic Float Operated Pivoted Switch is an economical,   maintenance
  free and reliable device used for high, low or intermediate level   switching
  point level switching. These switches come in various non-magnetic   materials
  & construction styles to suit broad range of media / applications. It is   designed
  to provide high repeatability and to minimize effects of shock,   Vibration & pressure.
  Related Links  : Side Mounted Magnetic Level Switch
                                   

  Technical Specification :
  Dial Size : 100mm / 150mm / 250mm.   maintenance
  Dial : Tin / Aluminum with black marking on white dial.
  Range : -38~600°C
  Accuracy : +- 1% Full Scale.Case & Bezel : Stainless Steel or Drawn                      Steel; Stove enamelled black color.
  Stem OD : 6/8/10/12/16mm.
  Stem MOC : SS-304 1SS-316.
  Mounting Process : Back! Bottoml Panel.
  Process Connection : 1/2 "BSP 13/4 "BSP / 1/2 "NPT or as required.
  Over Range Protection : 110% Full Scale.
  Pointer : Steel 1 Aluminum with Micro adjustment.
  Capillary MOC : ---
  Related Links  : Capillary Gauge | Bi-Metallic Gauge
                                   

  Technical Specification :
  Dial Size : 100mm / 150mml / 250mm
  Dial : Tin/Aluminum with black marking on white dial.
  Range : -38~600°C
  Accuracy : +- 1% Full Scale.
  Case & Bezel : Stainless Steel or Drawn Steel; Stove enamelled
                              black color.
  Stem OD : 6/8/10/12/16mm.
  Stem MOC : SS-304 1SS-316.
  Mounting Process : Back/ Bottoml Panel.
  Process Connection : 1/2 "BSP 13/4 "BSP / 1/2 "NPT or as required.
  Over Range Protection : 110% Full Scale.
  Pointer : Steel/Aluminum with Micro adjustment.
  Capillary MOC : SS-304 / SS-316.
  Related Links  : Mercury-N-Steel Gauge | Bi-Metallic Gauge
                                   

  Technical Specification :
  Dial Size : 100mm
  Dial : Tin / Aluminum with black marking on white dial.
  Range : -38~400° C
  Accuracy : +-2% FSD
  Case & Bezel : Stainless Steel or Drawn Steel; Stove enamelled
                              black color.
  Stem OD : 6/8/10/12mm.
  Stem MOC : MS Plated / SS
  Mounting Process : Back Entry
  Process Connection : 1/2 "BSP/ 3/4 "BSP / 1/2 "NPT or as required.
  Over Range Protection : 125% Full Scale.
  Pointer : Steel/Aluminum with Micro adjustment.
  Capillary MOC : SS-304 / SS-316.
  Related Links  : Mercury-N-Steel Gauge | Capillary Gauge
                                   

  
  Bourden Type Pressure Gauge

  Capsule Gauge

  Glycerine Filled Gauges

  Related Links  : Mercury-N-Steel Gauge | Capillary Gauge